What's the best gasket sealant for a thermostat housing?
2011年5月16日 · In the case of your thermostat housing gasket, if your surfaces are good and clean, apply GasGaCinch to the housing and the gasket, let it tack, insert the thermostat and …
66 289 Trouble With Leaky Thermostat Housing - Ford Mustang …
2010年5月20日 · I have always used nothing but GaskaCinch. It is a very light gasket adhesive. I've never needed to use a heavy sealant. I place the thermostat in the housing, apply some …
Persistent leak from thermostat housing (Help!) - Ford Mustang …
2013年12月27日 · Three months ago I had some bad intake and carb gasket leaks. I pulled the intake and replaced the gaskets, that solved that issue. The old thermostat housing was either …
how to install thermostat housing | Ford Mustang Forum
2010年5月12日 · lol alright here's the thing i installed the gasket that came with the housing and used atv but forgot to put the thermostat in . but yea i used a scotch brite and cleaned up the …
thermostat housing gasket leak - Ford Mustang Forum
2013年3月14日 · Put Permatex gasket sealer on both sides of the gasket, secured the T-Stat to the housing with a short length of bailing wire hooked on the end of the T-Stat and and then …
302 Thermostat Housing Rant - Ford Mustang Forum
2012年4月5日 · What I do is take the thermostat housing off and take it inside my house. At my coffee table I use a razor blade and clean off the old gasket. Then place the thermostat in the …
Thermostat Housing Leak - 302 | Ford Mustang Forum
2010年10月18日 · But like I said, I used a gasket and it worked. The Right Stuff was originally invented for engine manufactures so they could apply it with no gasket and test the motor …
Coolant system issue-possible thermostat housing
2014年2月28日 · That way the gasket that installs between the two housings does not have a chance of moving and not sitting properly on the lower housing. It comes with a helpful hints …
1967 mustang thermostat installation | Ford Mustang Forum
2008年7月16日 · Just as easy, but a bit messier. Gotta drain the coolant , remove the thermostat housing, remove the thermostat, make sure the old gasket is removed completely from the …
1967 Thermostat Sealant - Ford Mustang Forum
2010年6月5日 · Get a can of GasgaCinch. It is a light contact adhesive. Apply the adhesive to the housing and one side of the gasket and let it tack up. Place the thermostat in the recess then …