Accurate #7 For 10mm Auto? | Glock Talk
2014年12月15日 · Got my hands on a pound of "Accurate #7" powder and was wondering if this powder would perform better with 165 Speer Gold Dots or Hornady 180 XTPs. I'm leaning toward using it for the 165 Speer Gold Dots in my Glock 20. ( loads: 12.0 Grn./Speer 165 Gold Dot or 11.4 Grn./Hornady 180 XTP.) I've also got a pound of Power Pistol, too.
Accurate no. 9 Powder Change? | Glock Talk
2012年3月10日 · Accurate powder company etc. and he said that the last change for A#9 from Belgium to a mfg in Florida took place in 2009. Thats right.... 2009. Just goes to show you what the distribution and inventory chain can be like. In any case he described the new(est) powder as a flattened sphere as compared to the old gritty sand like powder.
Best 10mm powder, lowest pressure with highest velocity?
2012年8月10日 · in 10mm, i have used accurate 5, 7 & 9; alliant blue dot; hodgdon longshot, and imr "hi-skor" 800-x. Accurate no. 9 best fits the description of lowest pressure and highest velocities as far as i can tell. Like weewilly mentioned, we don't have pressure testing equipment.
most accurate powder for 9mm | Glock Talk
2012年11月2日 · A powder that does really well for light to mid weight jacketed bullets might not be suitable for lead / moly coated bullets. I've been very happy with Universal Clays for 9mm jacketed bullets, but it barely makes minor with 147s without going to/past max load, and makes nasty smoke with moly coated lead.
Looking for powder recommendation for 7.62 X 39 in a...
2023年5月31日 · I am looking for powder recommendation for 7.62 X 39 in a bolt action rifle (specifically a CZ 527). CZ says the CZ 527 is optimized for steel case ammunition and the gun was surprisingly very accurate with Tul Ammo. So far,my own reloads used IMR 3031 with a …
Accurate #5 or #7 in 40 S&W | Glock Talk
2011年3月17日 · This is a good article with some data. The 3.0 Bullseye was a little too light for my Beretta 96, I got powder coming back through the action and powder particles peppering my face. Going up to 3.5 solved that. So try small batches of the lighter loads to ensure proper function and work up if needed.
Longshot vs Accurate #9 for hot 10mm and Rowland (even...
2015年9月11日 · I could never get enough AA #9 in the case with the 180's to equal the N105 (another very full case load), Longshot (always plenty of room ) and 800x, but, it still is my favorite all around 10mm powder (I only load 180 and 200gr slugs). Enough velocity at high load density (meters like a dream in my Dillon drop), zero flash, very accurate powder.
Powder choice for 9mm 124gr load | Glock Talk
2011年3月1日 · I've been reloading 9mm since 1984 and I just recently converted to SR 4756. It is clean, it meters very well, and it is accurate. In the past, I've had good results with Blue Dot and Unique. Unique doesn't always meter well. Blue Dot can be touchy, especially with maximum loads and temperature changes.
Accurate TCM powder | Glock Talk
2020年3月17日 · Seems like TCM would be a powder that could work well for the heavy 10mm bullets. I load for both handguns with 4.5 & 5" barrels and load for a carbine too. The carbine is one reason to use a slower powder than my go to Long Shot loadings. Also I think TCM powder is supposed to be a flash suppressed powder but only read one article stating so.
Accurate 3100 Powder | Glock Talk
2024年4月1日 · Accurate 3100 was a slow burning extruded powder with a burn rate close to IMR-4831. Of the cartridges you listed, it would be best suited to 30-06 with heavier bullets. It also worked decently in .243 Win, .270 Win and .300 Win Mag. Accurate also offered a canister version called DP-86 that I burned through a couple 8 lb kegs of that was very ...