Feb 24, 2015 · I have a project that needs about 600 feet of PVC conduit to be installed under ground for a feeder out to a detached building. I am assuming directional boring will work for this project because we have a wide open space. However, I don't know how the PVC conduit will get installed properly...

Jun 13, 2015 · Some 20 years I was working for a company that hired a directional borer to drill under an employee parking lot. The boring company "found" one of the sprinkler system supply lines. Having a Certificate of Insurance from you sub is always a good thing.

Feb 15, 2021 · We are pricing to move an overhead service to underground, I inform AHJ, local inspector for the area that we are considering directional boring due to the circumstances. He asks how we plan on putting the metallic direct burial tape or some type of warning tape 12" above the bore for future indication.

Mar 23, 2014 · Welcome Spring To All. Hello, I have to bore a hole under a 6' sidewalk. I am thinking about using a pressure washer to accomplish this task. Has anyone ever tried this before and if so did it work? I usually use a long drill bit for my smaller sidewalks (30"). Thanks,

Apr 25, 2021 · I've pulled 200 ft of 2" sch 40 pvc conduit in a 4 1/2" directional bore. Just need room to glue to together ahead of time. A friend of mine has the contract with the local power utility for their directional bores. Usually road crossings. I've seen him pull back one 6" and two 4" hdpe conduits at the same time.

Sep 28, 2005 · Re: Advice for a typical 400 amp residential service Hello suemarkp, thanks for your input. I can see some areas of my configuration wouldn't be feasible with the options I could take within the meter pan, meaning I could hit my ground rod right from the meter and I think I've read somewhere that some meter pans come with the mains in it.

Oct 2, 2022 · I have an installation where I removed the main breaker from a 200A residential meter panel. I then ran conductors from the L1 and L2 busses that were connected to the line side of the main breaker. I used compression rings to terminate to the busswork with a belleville washer and the same size...

Aug 5, 2024 · The product is specifically for electrical conduit and is listed. It is about 60% of the cost of an e-loc coupling (my calculation of labor and material). I turned my directional boring subcontractor on to the product years ago and it is all they use now.

Oct 14, 2014 · Im looking for tips to hang a 200 lb encapsulated transformer from a roof purlin system. I dont have purlin sizes. Is it better to span a piece of strut between 2 purlins, or is it ok to drill holes in the z purlin and suspend it from the bottom of one purlin.

Sep 23, 2017 · Hello Guys , thank you for this helpful Forum my question is related to Circuit breakers position ,and its supplying direction i mean it is marked as always input or supply side to CB from upper terminals and it connecting to load side from lower terminals according to NEC ,and according...