2011年9月30日 · I am planning a dodge 5.2/318 swap into my Jeep. For what I want I think it will be the easiest. It can be mated to the Ax15 trans with a bellhousing from a 94/95 or so 3.9 V6 Dodge Dakota, meaning you can keep all of your stock or already modified drivetrain in place.

2014年3月10日 · Yeah, I'm gearing up to do a 4.0L swap into my 89 4.2L. In addition to performing this swap, I'm going to take the parts I can off the 4.2L and make the 4.0L a 4.5L stroker. Even though the 4.0L has less displacement, it has a higher horsepower rating due to the actual efficient emissions system.

2018年10月3日 · The Cherokee should have everything necessary to swap it's motor into a 6cyl YJ. With a good plan, a thousand dollars and a good bit of work, An early YJ owner can have a 4.0 on the road. A crate 5.3 LS is $4,660.00 on one website. Advance Adapters gets $1,300.00-$1,500.00 for a kit to install a LS into a standard shift YJ.

2011年7月13日 · I've got a 92' YJ with a stock powertrain. It currently has the 2.5l engine and AX5 tranny. I've got a fixed budget of $5,000 to spend on this project. I've got access to a shop with all the tools needed and a cousin who is pretty good at fabricating. Once complete the jeep will be about 80% on-road and 20% off.

2013年9月29日 · So here is what I started with: 1991 jeep wrangler – Engine – 4.0 HO (stock) Transmission – ax-15 (early model with small output bearing tip) Transfer case – np231 Suspension – Lifted six inches (suspension lift no body lift) Goal – To swap in 5.2 LITRE v8 and retain the ax-15 along with all drive axles positions and stock ...

2024年8月1日 · 7. Remove the engine mounts from the frame mounts and remove the engine and trans. 8. Full weld the frame side engine mounts to the frame. 9. Re-install engine and trans. 10. That's how I did it. If you need help using the factory YJ 4wd shifter on an NV3550, I think I have a post on here as to how I did it. Hope this helps.

2013年11月7日 · Novak and Advanced Adapters make engine mounts for this specific swap. The 5.2 and 5.9 Magnum engines have the exact same mounting points and locations, since the blocks are the same. What that means is, if you swap in a 5.2 and later on decide you want to bump up to a 5.9, the 5.9 will simply bolt right in to the motor mounts you installed for ...

2021年6月19日 · I'm contemplating swapping my 2.5l engine out of my 93. What bigger engines are recommended for swapping in? I've seen the 350 small block engine and a couple of Dodge engines, and I'm assuming that the 4.0l Jeep engine would work as well. What other engines are compatible with the AX-15 transmission?

2021年3月3日 · California laws allow for engine swaps. There are certain criteria you need to meet:-The engine has to be the model year of the vehicle or newer. For example, you can use an engine from a 1990 vehicle in your 1990 Wrangler, but you cannot use an engine from 1989 or before in your 1990 Wrangler.

2023年2月1日 · Step 5. Locate your donor engine/tranny/wiring harness and repeat steps 1-4 with the engine/tranny/wiring harness. Step 6. Figure out how to make the chassis plan mate up to the engine/tranny/wiring harness plan. Step 6. Once you have all of that information you can start to figure out what parts you need. There are just so many variables.