With the controller still in X-Input mode, you need to bring up the menu (usually Start + Select by default) and go to Main Menu -> Quick Menu -> Options -> Pad 1 Type, and set it to 'dualshock'. I also tested RC Stunt Copter (as it also requires the analog sticks) and was surprised the rumble was working too!

2020年4月17日 · Ibuy the 8bitdo PSC Bluetooth adapter (grey one) 8bitdo PSC adapter. You can use Wii U pro controller, switch pro controller, Xbox controllers, ps3 and 4 controllers, joy cons, Nintendo Wiimotes with the PSC.

2021年8月23日 · I’ve got the same configuration but I’ve got both card reader and 8bitdo on OTG. My steps were: 1 with both things attached start the console 2 push the botton on the 8bitdo and the pairing button on Xbox pad, the lights will blink and in a few seconds the pad will rumble 3 shut down the console, unplug 8bitdo and shut down Xbox pad 4 plug again 8bitdo start the console and turn on Xbox ...

My third party controller for PC (functions as a ps3/xbox360 with a switch), works perfectly xbox360 mode in retroarch on bleemsync 1.1 Reply reply Top 4% Rank by size

2019年8月18日 · By the way on a dualshock 4 SELECT is the SHARE button and on a switch pro controller it is the (-) button. 3/ Getting true analog support (Dualshock emulation) This is where the fun begins. Using the stock software on your PS Classic only allows you to use your adapter in the PS Classic mode.

2021年3月19日 · I believe that PS Classic has to recognize a controller as one compatible with PS Classic (stock gamepad, Yok, etc) if it's running stock software or Autobleem. If there's a custom kernel like Bleemsync, Project Eris there's built in support for other controller types. Those adapters are usually recognized as a generic dual joystick under Windows.

2019年5月7日 · if you plug in a usb keyboard and hit escape you can access the 'hidden menu' for pcsx. it reads the ps3 controller and even shows its device id name through usb (perhaps only because i installed the custom kernel) here it lets me configure all kinds of stuff like analog mode etc. but it wont seem to read button inputs when im in controller config. well it reacts to them when i press them but ...

2018年12月5日 · And since I tried setting it up the first time there doesn't even seem to be way to get Steam to "forget" the controller so I can't try setting it up as a different type of controller. I think I might have let Steam treat it like a generic controller. I would like to try setting it up as a PS3 or PS4 controller but Steam won't let me.

2018年12月30日 · OpenEmu still didn't work with this USB Playstation Classic controller. My experience on both Macs was exactly as u/RelevantParsley describes below . And it's strange because afterwards, when I use the " Joystick Doctor " utility to test every button press, each is recognized automatically and precisely, without issue.

2022年7月3日 · So I'm about to buy a PS Classic. I wanted to connect a Controller that feels like the original PS 1 Controller with Analog Sticks or at least the PS2 Controller. I've seen that there is a variety of possibilities like connecting a original controller via an USB adapter, connecting USB controllers from third party developers and so on.