GitHub - aki27kbd/trackball_module: 34mm trackball module …
This is a module part for 34mm trackball with ADNS-5050 sensor. Module size is within 2u x 2u (38mm x 38mm) so that it can be easily implemented with existing DIY keyboards. Connection with other boards is via 2.54mm-pitched 5 pins or 1.0mm-pitched SH connector.
trackball_module/doc/buildguide.md at main - GitHub
meishi trackball moduleは、名刺サイズ（55mm×91mm）の自作トラックボール検証基板です。 そのまま組み立てることで、34mmトラックボールとスイッチ×2、ロータリーエンコーダ、OLEDを搭載したマウスやマクロパッドとして利用することが可能です。
Trackball Module | holykeebs Documentation
The trackball module consists of a small adapter PCB (shield) that sits on a top mounted controller, and creates the necessary connections to easily use a Pimoroni Trackball. Tools In addition to a soldering iron, you will need flush cutters that can cut header pins.
trackball_module/README.md at main - GitHub
This is a module part for 34mm trackball with ADNS-5050 sensor. Module size is within 2u x 2u (38mm x 38mm) so that it can be easily implemented with existing DIY keyboards. Connection with other boards is via 2.54mm-pitched 5 pins or 1.0mm-pitched SH connector.
Trackball module manual - Ultimate Hacking Keyboard
The trackball module has two configurable buttons, mapped by default as left click and right click. Use Agent to remap these buttons and configure your module speed and settings. The ball housing can accumulate dirt over time, resulting in less precise pointer movement.
meishi Trackball Module - aki27kbd-lab - BOOTH
https://github.com/aki27kbd/trackball_module/blob/main/doc/buildguide.md. 注意事項 ・このキーボードは細かいはんだ付けが必要なキットになります。ビルドガイドをよくお読みの上、購入をご検討ください。
Pimoroni Trackball Module – holykeebs
The trackball module consists of a Pimoroni trackball mounted on top of a controller. This setup is ideal for using the trackball with your index finger. Can be used on existing keyboards to get trackball functionality.
Trackball Module - Ultimate Hacking Keyboard
The trackball module attaches to the right keyboard half; it features excellent precision and usability and is well-suited to be used by a thumb. The two buttons are fully configurable, and the ball cannot be pressed as a button. Pointer movement versus scrolling can be configured on a per-layer basis. Following is a demonstration of
F38 Series Rugged Trackball Module - Seatronx
The F38 Series trackball module is a high specification human interface device designed to operate in extremely demanding environments where reliability and
QMK Introduction: Running meishi Trackball Module with …
Feb 29, 2024 · This article introduces how to run meishi Trackball Module with custom firmware using QMK. It covers specific steps, including solving the trackball angle problem, QMK compilation errors, and setting up custom keys.