Auto-Changeover: A mode in which the thermostat will turn on the heating or cooling based on room temperature demand. Cool Setpoint: The warmest temperature that the space should rise to before cooling is turned on (without regard to deadband). Deadband: The number of degrees the thermostat will wait, once a
Auto-Changeover: A mode in which the thermostat will turn on the heating or cooling based on room temperature demand. Cool Setpoint: The warmest temperature that the space should rise to before cooling is turned on (without regard to deadband). Deadband: The number of degrees the thermostat will wait, once a
The Table of Contents divides the thermostat features into sections making it easier to quickly find information. In addition, this manual also has an Index to help you find any information
Venstar
Integrate Venstar's Wifi thermostats into Custom Home Automation and Building EMS Systems.
- [PDF]
with Wi-Fi - Venstar
This Explorer Mini thermostat has the ability to receive updates to its firmware. Periodically firmware updates are released by the manufacturer to add features and/or performance enhancements.
Venstar
Integrate Venstar's Wifi thermostats into Custom Home Automation and Building EMS Systems.
operate your thermostat using the factory default settings. These settings are depicted in the illustrations throughout this manual. SECTION 1 Quick Start 1
The thermostat is preprogrammed from the factory to operate one or two stage equipment* without the need for further programming. To optimize the installation of this thermostat, follow the instructions in the Advanced Setup section. Setting the Clock MODE FAN MODE FAN Tip: To change hours quickly, press and hold the FAN
Slimline Thermostat - Venstar
Update the firmware and easily create photo galleries for ColorTouch thermostats. Local API Integrate Venstar's Wifi thermostats into Custom Home Automation and Building EMS Systems.
The most common way to program the EasyStat thermostat is to program it just as you would an alarm clock. You can program this thermostat in the HEATING MODE (normal winter operation) and/or in the COOLING MODE (normal summer operation). These setpoints will be stored and used any time that the program is on (WAKE/SLEEP).