BRAYTON CYCLE | Animation on Make a GIF

And the Brayton cycle processes. Ericsson and Brayton cycle. 2:... | Filo

Air is used as the working fluid in a simple ideal Brayton cycle that has a pressure ratio of 12, a compressor inlet temperature of 300  K, and a turbine inlet temperature of 1000  K. Determine the required mass flow rate of air for a net power output of 70 MW, assuming both the compressor and the turbine have an isentropic efficiency of (a) 100 percent and (b) 85 percent. Assume constant specific heats at room temperature. | Numerade

SOLVED: The turbine section of a Brayton cycle gas turbine receives hot compressed air at 150psia and 2100 o R, expands it to 15 psia and develops a gross output of 15,000 HP. Airenters the compressor at 500 o R. Determine: a) Mass flow rate (lb m/s ), b) power to drivecompressor (HP), c) Net power output, d) thermal efficiency, e) mean effective pressure(psia)

A gas-turbine power plant operates on a simple Brayton cycle wi... | Filo

A large stationary Brayton-cycle gas-turbine power plant delivers a power output of 100000 hp to an electric generator. The minimum temperature in the cycle is 540 R, and the maximum temperature is 2900 R. The minimum pressure in the cycle is 1 atm, and the compressor pressure ratio is 14 to 1 . Calculate the power output of the turbine, the fraction of the turbine output required to drive the compressor, and the thermal efficiency of the cycle. | Numerade

SOLVED:A stationary gas-turbine power plant operates on a simple… | Numerade

Q.6The pressure ratio of a simple Brayton cycle using air as t... | Filo

The compressor pressure ratio of an ideal air standard Brayton cycle is 10. If air enters the compressor at 101.3 kPa and 295  K with a mass flow rate of 11.50  kg / s, determine (a) the net power developed and (b) the thermal efficiency. | Numerade