How to Repair a Hot Tub Water Pipe

Small Snake Slithers out of Tub Jet

Hey Hot Tub Owners! Are your hot tub jets not working? It’s a common problem with a quick and easy fix. And if you’ve just refilled your hot tub, chances are you have an AIR LOCK. The solution? Burping your jets. Step 1. Select priming mode on your control panel. It’s okay if you don’t have this option, but it helps. Step 2. Turn the jets on low for 10 to 20 seconds. Step 3. Switch the jets to high for another 10 to 20 seconds. Step 4. Repeat a few times until the jets are working and there's no

Hey Hot Tub Owners! Can’t get your hot tub to heat up? The problem might not be the heater. It could actually be your filter. Low water flow can cause your heater to stop working properly. And low flow can be caused by a dirty filter. So before calling in a professional, remove and clean your filter to rule out a flow rate problem. Then, make sure the water level in your hot tub is high enough. Finally, make sure there are no closed valves and there’s nothing blocking your drain covers. Hopefull

Got a new hot tub? Here are 3 things you must do before starting it up for the first time #1. Watch out for antifreeze. New hot tubs come with antifreeze in the lines to protect it in colder temperatures. Use a hose to spray water directly into each jet to clean the antifreeze. Or fill the tub, circulate the water through the pump for several minutes, then drain completely before refilling. #2. Use the filter well. Put your hose inside the filter well when filling up your hot tub with water. Thi